Mastercam 2023

Mastercamin uusi versio on julkaistu. LUE LISÄÄ


Haemme vahvistusta tiimiimme CAM-osaajasta! LUE LISÄÄ

Alihankintamessut 2022

Löydät meidät osastolta C921. LUE LISÄÄ

Rakennamme tänään metalliteollisuuden ja koneistamisen huomista. LUE LISÄÄ

Mastercam postprocessor modify request

The postprocessor editing process requires feedback from the customer because the NC code needs to be tested by the customer and given feedback to the postprocessor manufacturer.

Postprocessor testing should start with a simple test program that shows the most common machining plains and cycles. If the postprocessor is tested with a production part notice that the postprocessor does not yet produce the desired NC code and it may take time to make changes.

Postprocessor feedback is easy to give by making a test program with Mastercam, from which modifications are marked in the printed NC code, eg with * marks

N100 G21
N110 G0 G17 G40 G49 G80 G90
N120 T219 M6 ***M6 after toolnumber***
N130 G0 G90 G54 X-25. Y10. A0. S3000 M3 ***no need for A axis***
N140 G43 H219 Z25.
N150 Z10.
N160 G1 Z0. F600.
N170 X-15.

Then send the modified NC code and the Mastercam file to Camcut Oy, which checks desired changes and discusses with the postprocessor manufacturer to make the necessary corrections.

If the customer does not know what commands the CNC machine needs, he should find out these from the machine seller.